1/2" x 12" Stainless Steel Cane Bolt
This 1/2" x 12" mill finish stainless steel cane bolt is designed for securing single and double doors/gates in the open or closed positions. It can be used for vertical as well as horizontal applications.
The "ears" on the cane shaft prevent the bolt from being removed, and also allow the bolt to be held in the raised/open position.
The throw (disengaged position, to fully engaged) is 3-1/8".
Includes 4- #12 x 1-1/4" type 18-8 stainless steel Phillips pan head tapping screws.
Made in China
Stainless Steel Cane/Slide Bolt
Basic Kits
A heavy duty cane bolt for fixing one side of a double gate or door opening.
This hardware can also be used as a heavy duty horizontal slide bolt, or to bolt the top of a door to the head jamb.
The purchase of additional pieces allow the basic kit to be configured to accommodate a variety of installations including a lockable engaged and a lockable disengaged configuration.
Features
- Standard configurations allow for a minimum of 2" of engagement
- The cane has a tapered end to facilitate engagement in the adjacent surface
- Each kit includes stainless steel fasteners with a matching finish and a stainless steel roll pin
- A hole for the roll pin is positioned to prevent the cane from being withdrawn from the lower bracket during normal operation and also from being easily removed altogether
- Parts are de-burred with the edges eased and have a uniform quality look and feel
- Includes installation diagrams for 4 basic configurations
Available in 4 Finishes
(the various finished are shown on the detail pages)
- Mill Finish Stainless Steel- Other than de-burring, the parts are unfinished.
- Brushed Stainless Steel- A fine brushed finish.
- Polished Stainless Steel- A hand polished chrome like finish.
- Polished Gold PVD- A polished gold finish.
Physical Vapor Deposition (PVD) is one of the most durable decorative finishes that is currently available.
The basic kit includes 1 solid Cane, 1 Guide Bracket, and 1 Combination Guide/Hanger Bracket all in matching finish. Also included is a 3/16" x 3/4" stainless steel roll pin, and 4- #14 x 1-1/4" stainless steel Phillips pan head tapping screws in matching finish.
The brackets are made from type 304 stainless steel, the cane is type 304HC stainless steel, and the screws are type 18-8 stainless steel.
Overall cane dimensions are 5/8" x 4-1/4" x 18" or 24". Brackets are 3.0mm x 1-1/4" in width and project 1-5/8", with the guide bracket measuring 3-3/4" in height, and the combination guide/hanger bracket measuring 4-1/4" in height.
Made in China
Receive a per set discount when you order more than one 18" or 24" cane bolt set. The checkout price will automatically reflect the discount for multiple quantities of one line-item.
** Please Note: Cane bolt sets do not qualify for our standard shipping and handling terms, where if the order weighs less than 3 lbs. the shipment will be sent using Priority US Mail service. The majority of single set cane bolt orders are shipped using UPS Ground service, but an order with multiple 12" cane bolt sets may be sent using Priority US Mail service. The $7.50 standard shipping and handling price is still the same, it is just that an order that includes a cane bolt, and weighs less than 3 lbs., will not necessarily ship using Priority US Mail service.
18" Cane Bolt Basic Kits
Receive a $3 discount per set when you order 2- 18" Cane Bolt Sets (of the same finish),
a $5 discount per set for 4 or more, and a $7 discount per set for 8 or more.
24" Cane Bolt Basic Kits
Receive a $3 discount per set when you order 2- 24" Cane Bolt Sets (of the same finish),
a $5 discount per set for 4 or more, and a $7 discount per set for 8 or more.
Additional Parts for Alternate Configurations
Strike Plates
For installations where a more finished look is desired, or for additional security.
Each strike includes 2- #14 x 1" stainless steel Phillips flat head tapping screws in matching finish.
The strike plate is made from 3.0mm type 304 stainless steel, and the screws are 18-8 stainless steel alloy.
Overall strike plate dimensions are 1-1/4" x 4" with a .66" diameter hole.
Made in China
** Please Note: These items are only available with the purchase of a 5/8" cane bolt set.
Guide Brackets
For installations where the combination guide/hanger bracket is required to act as a locking mechanism, or where additional guide brackets are required for engagement on the adjacent surface.
Each guide bracket includes 2- #14 x 1-1/4" stainless steel Phillips pan head tapping screws in matching finish.
The guide brackets are made from 3.0mm type 304 stainless steel, and the screws are 18-8 stainless steel alloy.
Overall guide bracket dimensions are 1-1/4" in width x 3-3/4" in height and protrude 1-5/8" from the surface.
Made in China
** Please Note: These items are only available with the purchase of a 5/8" cane bolt set.
Stainless Steel One Way Screws
For installations where a higher level of security is desired and where the installation of one-way screws will make removal more difficult.
